Solar Street & Area Light
All-in-one solar street and area light, 30–100 W and up to 195 lm/W, with a built-in microwave motion sensor and a removable LiFePO4 battery.
This all-in-one solar street and area light is made for rural and urban roads, parking areas, paths, parks and plazas where running power is costly or impractical. The solar panel, battery, charge controller and LED module are built into one aluminum housing that mounts on a 60 mm pole.
It comes in five sizes (30, 40, 60, 80 and 100 W) and three versions: Standard, Long Autonomy with a larger battery, and Hybrid, which can also run on AC power. An MPPT charge controller and a built-in microwave motion sensor keep the light at low output and brighten it when motion is detected, with the brightness stepping down through the night.
The LiFePO4 battery is rated for more than 2,000 cycles and can be removed for service. The LED module angle is adjustable, and the housing is rated IP66, IK08 and C3 for corrosion.
- 01All-in-one design, up to 195 lm/W
- 02Built-in microwave motion sensor with timed dimming
- 03Five sizes, 30–100 W, up to 19,300 lm
- 04Long Autonomy version: 4–6 days in intelligent mode
- 05Removable LiFePO4 battery, 2,000+ cycles
- 06Adjustable LED module
- 0760 mm post-top or side-entry mounting
- 08IP66, IK08, C3 corrosion rating
- Output
- 5,200–19,300 lm
- Wattage
- 30, 40, 60, 80, 100 W
- Applications
- Streetlight; Roadway; Area Light; Parking Lot; Walkway
- Environment
- Outdoor
- CCT
- 3000K, 4000K or 5000K
- Input voltage
- Solar (LiFePO4 battery); Hybrid version adds AC input
- Efficacy
- Up to 195 lm/W
- Warranty
- 5 years (3 years on battery)
- Rated life
- 126,500 h (L80B50)
- Ratings
- IP66; IK08; C3 corrosion
| Document | Type | |
|---|---|---|
| Solar Street & Area Light Spec Sheet | Spec sheet | PDF ↓ |
| IES photometric files | Photometry | On request |
